Restore From Cloud At Ridgebrook
🔧 Bare Metal Recovery from MSP360 (Staging Backup)
1. Boot into Recovery
Insert and boot to the MSP360 Recovery Disk on the target machine.
2. Launch Bare Metal Recovery
From the Recovery Environment menu, choose “Bare Metal Recovery"
3. Authenticate with MSP360
Enter your MSP360 account credentials (Username/Password)(staging@dtctoday.com was used in the example below)
o Credentials are stored in 1Password if needed - https://start.1password.com/open/i?a=QF5SHHOLYVG5TMAI3PF2TQM5GA&v=wcqnpbfbjggdea6jruotfavnou&i=x6jk3ody2jemuok3ewcfnzajx4&h=team-dtc.1password.com
4. Select the Storage Location
Choose “Staging Storage (Restore Only)” from the list of available locations.
5. Troubleshooting: Missing Staging Storage
If the Staging Storage is not listed:
1. Exit the Bare Metal Recovery interface.
2. From the main menu, go to: Tools → Backup.
3. Switch to the “Backup Storage” tab — confirm the Staging Storage appears here.
4. Exit the Backup tool and return to Bare Metal Recovery — the Staging Storage should now be listed.
6. Select Backup Job
SelectChoose Barethe Metalbackup Recovery.job named “Staging Job".
Select Staging Storage.
7. Locate the Backup Image
Structure: Company > Location > ComputerName
Choose8. Select the
backupBackup job named “Staging Job" to restore.
Select the Latest version available as the restore pointpoint.
Click Yes to retrieveRetrieve archive content.content from storage.
9. Review Partition Layout
SelectYou allshould partitions.now see the partition layout from the backup image. Click Next to proceed.
10. Choose Local Disk
SelectEnsure the correct physical disk destination foron the restore.local machine is selected as the destination.
11. Configure Logging/Notifications
Proceed through the Notifications and Logging screen (default settings are fine). Click Next.Next.
12. Confirm & Restore
On the Summary page, review settings. Click Finish to start the restore process.
13. Completion
Once you receive the message stating the restore has completed, close the Restore tool.
14. Final Step
Exit the Recovery Environment and boot into the restored system image.
